procyon

[The Floor Guy]

currently i use procyon for just about everything and am pleased witht the results. there are jobs i come across that need that something extra. what do you suggest? do i need to use a rinse to neutralize it afterwards? what about for quarry or ceramic tile? such as in a home's bathroom or in gas station store areas? thanks

[Donald]

Our Procyon is called Soap Free and is located at
http://www.steam-brite.com/store/sha...ee-p-4977.html
Be sure to compare our lower prices.
Our most popular booster is call Kryptonite
http://www.steam-brite.com/store/sha...lon-p-209.html
This neutral pH products is safe to use on all surfaces.
You will find this one-two punch of Soap Free and Kryptonite can also be used to clean tile floors as well as carpet and upholstery. It is always recommended to rinse the fabric with a small amount of Flush Rinse Aid (1/2 oz per gallon in a portable or one cup in 5 gallons slurry for truckmount) Be sure to not inject/mix your Flush in the machine while you are prespraying if you are using an injection sprayer/HydroForce/Cobra Sprayer. This will neutralize the pre-spray. Only add Flush to the portable or turn on the slurry after you are finished with pre-spraying your project.
http://www.steam-brite.com/store/sha...lon-p-266.html
and any remaining spots be removed with Dry Cleaner and re-rinsed.
http://www.steam-brite.com/store/sha...lon-p-270.html