Pleated Filter 16" X 16" X 2" Merv 8 860959
Construction
The filter is completely factory assembled and constructed with a pleated media pack of a high nonwoven fabric. It is installed into a heavy duty, double wall, moisture resistant, die cut, craftboard frame or a rigid, galvanized steel frame. The media pack is glued into the interior walls face support members of the frame; eliminating air bypass and filter failure. The filtration media is glued to a non-corrosive, wire, support grid. This feature results in pleat stability, spacing, and proper dust loading under new air flow conditions. The filter is extremely rigid and will not give way to racking, warping, or collapse under normal handling or air flow conditions.
Available in MERV 7, MERV 8, MERV 11, and MERV 13 efficiencies
Available in 1", 2" and 4" thickness
Low pressure drop
Available in Carbon
0.007 Welded galvanized wire reinforced pleats
All glued construction
100% Synthetic Filtration Media
Frames are 0.026 coated kraft board
Nikro 860959
12 per case
Buy More, Save More
|