Clean Storm CRB17-240v Wide Pre-Scrubber and Dry Cleaning Machine TM4C-240v International [CRB17-240v]

Click to enlarge

Your Price: $3,235.02
Part Number: CRB17-240v
Quantity:
Estimated shipping cost: $ 439.00

Clean Storm CRB-17" Wide Counter Rotating Brush (CRB) Pre-Scubber Shampooer and Dry Cleaning Machine VLM (Very Low Moisture) 240 volts for international use!

Description

Commercial carpet cleaning system that gives you 6 machines in 1.

Pre-scrubbing agitator for before hot water extraction.
Adsorbent powder and encapsulation dry carpet cleaning machine.
Hard floor cleaning machine.
Pile lifting machine.
Area rug / wool cleaning machine.
Ultimate Hair removal machine.

Features

Use on dry, or damp carpet.
Change between brush types in under one minute.
Ultra fast, super easy to use.
Counter rotation of brushes makes the machine glide over the carpet like a hockey puck on ice!
Built for the dry cleaning industry but quickly taking over as the best prescrubbing machine on the market today!
Use before you rinse with your hot water extraction machine.
One machine can clean the carpet, tile and delicate wool rugs.

Specification

1 year limited warranty on machine
2 year limited warranty on motor
Sound level: 57.8 dB
Dirt capacity: 0.9 gal
Power 240V
Brush rotation speed 380 RPM
Weight 55 lbs. | 24 kg
Dimensions (W × H × D) 17.0 × 9.2 × 42.5 in 40.6 × 69.9 × 105.8 cm
Cleaning capacity (carpet/hard floor encapsulation cleaning): 7500 square feet/hour/ Agitation for prescrubbing 10,000 sq ft hr.(929 sq meters)
Includes Blue "medium" Carpet Cleaning Brush.
15" Wide Brush / 17" Wide Housing
Machines have splash proof electronics and can be used in rug pits, carpets and hard floor surfaces.
Cylindrical counter-rotating brushes dislodge embedded soils without damaging carpet fibers
Renovator system captures dry particulate matter and debris and lifts pile while agitating.
Solution dries in minutes
Multi-purpose: use to agitate prespray before hot water extraction; change brushes for wood floors and other hard surfaces
Connect two units for even faster cleaning!
Great for residential and commercial carpet

Warranty Statement
Owners Manual
CRB 2019 Manual
Schematics
Brochure

Included

Quadruple discount: Free shipping, free chemical, free power cord, free extended warranty!
Includes snap in stainless steel dust and splash covers and renovators for dirt and adsorbent power collection.

	Includes: Snap in Stainless steel renovator trays with view windows.
	Includes: Snap in Stainless steel splash and dust cover with transport wheels.
	Clean Storm E8 Transport Tray Assembly for CRB 17 and TM4-C
	Clean Storm B753-DS Blue Standard Brush 15in For CRB 17in Floor Scrubber Machine TM4 - Sold Each

Compare to current or past OEM associations Pro 35 Machine

15" Multi-Clean Counter Rotating Brush
Prospector Encap-Pro TM4 VLM
Sapphire Scientific 67-065
VersaClean CRB1580
MasterBlend 320100
PM-ENCAPTM4-EA
Clean Storm CRB17
CRB Industries TM4
Brush N Clean
Zerorez Lifter
OE-TM4-EA
1640-7924
CRB15
CRB17
CRB-17
ND15

Optional

	Clean Storm B750-DS Green Stiff Hard Brush 15in for CRB 17in Floor Scrubber Machine TM4 - Sold Each (Used to be Black)
	Clean Storm B751-DS Gray Soft Brush 15in for CRB 17in Floor Scrubber Machine TM4 - Sold Each
	Clean Storm B752-DS White Extra Soft Brush 15in for CRB 17in Floor Scrubber Machine TM4 - Sold Each
	Clean Storm B753-DS Blue Standard Brush 15in For CRB 17in Floor Scrubber Machine TM4 - Sold Each
	Clean Storm B754-DS Yellow Extra Stiff Hard Brush 15in for CRB 17in Floor Scrubber Machine TM4 - Sold Each
	Clean Storm T-4S Tandem Bar for CRB17 TM4 ON BACKORDER UNTIL MARCH
	Clean Storm 20170401 AbZorb Ultra Pro Organic Compound Dry Carpet Cleaner 28 lbs. DryZone
	Harvard CRB and VLM Encapsulation Cleaner Combination 20161206

Compare Carpet Cleaning Counter Rotation Brush CRB Agitator Scrubbers Encap Comparison

Preventive Maintenance on CRB Machines

Between each job, remove the brushes and wipe out the crud under the brush cover and by the bearings. (Use box rags, thick paper towel)

At the end of the day after all jobs, use a cleaner such as Mr. Clean, Windex or a possible disinfectant with a scrub brush and wipe down with box rags.

Make sure the bearings on the non-gear side spin freely, the moment they begin to not spin freely; it can torque the gear side and cause the gears to break. You will need to replace the non-gear side bearings as soon as they stop spinning freely. Important to check this on a weekly basis.

Cleaning of Brushes: Take a 5-gallon bucket full of hot water and place the brushes in it. It will normally turn extremely black. Empty out the 5-gallon bucket and repeat. For extreme rat nasty with some brushes, you may need to repeat this process 6-7 times. The avg. time it takes per bucket full of hot water is 45 mins. During the final soak pour a few ounces of disinfectant and let it sit for 30-60 mins. Remove from bucket, set in front of fan and let dry.

Remember the brushes get full of crud, dirt and debris and that overtime you don’t get as good as a clean. As the brush spins, all the crud collects on the black tube and it collects on the bristles from the inside moving out. However, if you constantly clean the brushes at the end of the day, they stay almost brand new for an incredibly long period of time.

Note: It can take up to 2 days for the dirtiest of brushes as you repeat the bucket of hot water process 6-7 times. It is recommend you do the process as much as needed until the water does not change colors. Also, if you do not properly clean after every job, the crud builds up and the gears work harder since the brush has to fight against the built up crud and this can cause the gears to break.

Brush Rotation: Do not rotate the brushes from front to back. Since the brushes are soaked in hot water, it takes the memory out of that brush. However, if you use the machine for a long period of time, you will need to flip the brush but not front to back, only the other way around. It is important to remember that the brushes have a natural curve to the bristles tips and the bristles form “a memory” after constant use. You will need to rotate the brushes so the memory goes the opposite direction and begins to clean better.

Note: In order to tell when this happens, pay close attention to the cleaning results. If the results become mediocre, then flip the brushes.

Insert some grease between the bearing and the cover and the bearing shaft entrance every month.

Every 3 months, remove the gear cover, clean the gears and re-grease with white lithium grease.

Make it a habit to remove the bearing cover every month to clean it up well with W-40 and make sure to dry it with compressed air and fit the cover together again.

Steambrite processes shipments daily by Fedex, UPS, and USPS (for small packages), as well as a using a variety of freight carriers for oversized/palletized shipments. While the Steambrite website DOES reflect what is available for purchase, it does NOT reflect available inventory at our local warehouse (San Antonio, TX). Special order, or custom build items may take up to 30 days to arrive, but orders shipped from within Steambrite's warehouse inventory are generally processed and shipped in 2-5 business days. Equipment small enough to be sent by ground should typically arrive within 3-5 business days after shipment. Oversized shipments could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed.
Clean Storm CRB17-240v Wide Pre-Scrubber and Dry Cleaning Machine TM4C-240v International [CRB17-240v]

Click here for our full shipping policy. Specifications are subject to change without notice.
Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. Display images are for reference only, note that all purchases are fulfilled by the part number ordered. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.

This product was added to our store on Monday 16 July, 2018.