DriStorm WRT-Wall, Cavity, Ceiling, and Cabinet Drying 15FT Hose Extension with 16 Nozzles 20180627

Used to push warm dehumidified air in small wet areas including but not limited to walls, cabinets, ceilings, and cavities.
Used to extend drying to the adjacent room.

Factory Installed Carpet Cleaners Vacuum Hose 15ft Long (5 meters) x 1.5in ID H295 8.620-199.0 AH15TM 260-038-16

Factory Installed Cuff: 1.5in Threaded X 2.0in Slip Vacuum Enlarger Hose Cuff AH46 Expanded 19-027 579-012

Factory Installed DriStorm 20180623 Wall and Cavity Drying Warm Air Manifold Extension Fitting SBM1638

Factory Installed Clean Storm 2in Truckmount Rubber Vacuum Cap Prochem 86180700 [20130523] White Magic E109C

Factory Installed Connector 1.5in OD X 1.5in OD Smooth Wall Plastic Vacuum Hose Joiner 20171204

Factory Installed Heat Shrink Tubing 3in Diameter X 1 ft (10in Circumference /5in Flat) 20910315

DriStorm WRT-WALL Cabinet, Cavity, and Cabinet Warm Air Dryer 20180630  Go from 27 ports to 43 or 59 ports.

Works with all your existing tubing, hoses, mats and accessories from Injectidry MI26 HP PLUS Wall & Ceiling Drying Package

Works with all your existing tubing, hoses, mats and accessories from Drieaz F211-AK Driforce Inter Air Drying System Accessory Kit

Works with all your existing tubing, hoses, mats and accessories from Injectidry Wall and Ceiling Package MI20

Works with all your existing tubing, hoses, mats and accessories from Drieaz F211-BU Driforce Inter Air Drying System Base Unit

Works with all your existing tubing, hoses, mats and accessories from Drieaz F211 Driforce Inter Air Drying System

DriStorm Dehumidifier Booster Amplifier 20181009 Raises Temp and Lowers Relative Humidity  Video On Link!

Clean Storm Mesh Hose Bag Black Extra Large 30in X 40in MBB15 Air Care CE3052A AC1844

Connector: 2in Barbed x 2in Barbed x 2in Barbed Plastic Tee Fitting SBMVT  Split your extension nozzle set in two different directions.

Switch out the included 2" cuff for 1.5" cuff when needed. Cuff: 1.5in ID Slip X 1.5in Hose Thread - Standard 1.5in Vacuum Hose Cuff H300 [AH42] 8.708-903.0 579-005 J00625

DriStorm 3/8 ID X 1/2 OD X 500 Ft Nylon Flex Tubing for 200 degree Air for Wall Cabinet Cavity Driers 20180629

3/8in Barbed X 1/4in Barbed Plastic Hose Reducing Coupler Joiner [20180622] RF884 33406B  Reduce the hole size in the wall from 1/2" OD hose to 1/4" OD barbed insert

3/8 in ID X 1/2 in OD Polybraid Rein Tubing X 300' - 8.704-753.0

Remove the rubber cap and add the section below to move up to 32 ports, the re-install the cap. DriStorm 20180623 Wall and Cavity Drying Extension Fitting