HydroForce AS08P-D, Demo Injection Sprayer Plus High Pressure, with blow molded jug 1639-0775 [AS08P-D]

Click to enlarge

Your Price: Add to cart to see price
Part Number: AS08P-D
Quantity:
Estimated shipping cost: $ 17.00

HydroForce AS08P-D: Injection Sprayer Plus High Pressure with blow molded jug 1639-0775

Used one time saves you 25% off. Only 1 at this price!

Description

The original injection sprayer (100 - 1,000 PSI). Finish Jobs Faster with Hydro-Force Injection Sprayers. For those that want an exceptional sprayer at a great price. The Hydro-Force Plus offers many of the great benefits of the Hydro-Force Pro injection sprayer including the same durable spray gun, stainless steel extension and long-lasting injection valve.

Features

Most affordable sprayer on the market
Operating pressure range of 100-1,000 PSI
Eliminates annoying mixing required by pump up sprayers

Specifications

Blow molded, 5 qt. transparent container
7 dilution ratios using metering tip kit NA0816A
Spray gun rated at 2600 PSI and 7 GPM
Chemically-resistant seals
18" stainless steel wand

Parts List
Manual

Video

Video Downloads

How To Clean You Injection Sprayer Filter Video
How to Repair or Rebuild the Injection Sprayer Trigger Valve Video

Compare to current or past OEM associations:

Multi-Sprayer INJ-6
8.697-413.0
86974130
PR101
AS08P
1639-0775
T-015
107379

Additional Information

General Function:

The Hydro-Force Injection Sprayer is based upon an injection system that consists of a specially designed valve that injects a concentrated chemical into the high-pressure water flow from the machine. Hydro-Force is designed for use with incoming water pressure of 400 PSI. The water flow is automatically reduced as it passes through the injector valve, thus reducing the pressure approximately 64%. To obtain the actual working pressure of your Hydro-Force Injection Sprayer, multiply your incoming pressure by 36%. The Hydro-Force Injection Sprayer is factory set to inject chemicals at a 1 to 8 ratio. Other chemicals may be used but should be prepared for a 1 to 8 dilution. The Hydro-Force pressure can be increased by putting a smaller jet at the end of the wand. This will, however, decrease the injection rate of your chemical. Your injection ratio may also change depending on the viscosity (thickness) of your chemical concentrate. The 1 to 8 ratio is based upon chemicals with a similar viscosity to water. The injection ratio can also be slightly affected by your main flow water temperature. This is generally not enough of a change to appreciably change the effectiveness of your system. We do, however, recommend the water temperature be kept below 200 degrees Fahrenheit, as higher temperatures can cause problems on the injection.

Pre-Spray and Traffic Lane Applications:

Hydro-Force Injection Sprayer eliminates the hassles of measuring and mixing. We recommend you keep an extra 5-quart container or two on your truck to make sure you never run out and to facilitate quick changes of your chemical containers. Remember that Hydro-Force Injection Sprayers automatically mixes at a 1 to 8 ratio. If your 5-quart container is full then that is the same as holding an 11-gallon pump sprayer of regular, ready to use pre-spray. We have found that Hydro-Force Injection Sprayers offer better penetration and overall coverage than most other sprayers. It is therefore possible to pre-spray your jobs up to 45 minutes before you reach that area to be cleaned. An effective way to use the Hydro-Force for pre-conditioning or small to medium jobs is to start at the door coming into the house, spraying all the traffic areas, working your way to the farthest point back in your job. You have then completed your pre-conditioning in just seconds and are prepared to hook up your wand and start cleaning your way out. Keep in that your Hydro-Force is spraying 3 to 4 times the amount of product your normal pump sprayer is putting out. This means you must move quickly to avoid over-applying. Protector should be applied in even, slightly overlapping strokes.

injection sprayer options

Optional

Be sure to purchase a couple of extra jugs, one for each chemical you like to use.
AS30 Injection Sprayer Empty Un-Marked Blow Molded Plain 5 Qt Sprayer Jug Solid Cap MP-UH18-EA PR110 1689-4762

Steambrite processes shipments daily by Fedex, UPS, and USPS (for small packages), as well as a using a variety of freight carriers for oversized/palletized shipments. While the Steambrite website DOES reflect what is available for purchase, it does NOT reflect available inventory at our local warehouse (San Antonio, TX). Special order, or custom build items may take up to 30 days to arrive, but orders shipped from within Steambrite's warehouse inventory are generally processed and shipped in 2-5 business days. Equipment small enough to be sent by ground should typically arrive within 3-5 business days after shipment. Oversized shipments could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed.
HydroForce AS08P-D, Demo Injection Sprayer Plus High Pressure, with blow molded jug 1639-0775 [AS08P-D]

Click here for our full shipping policy. Specifications are subject to change without notice.
Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. Display images are for reference only, note that all purchases are fulfilled by the part number ordered. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.

This product was added to our store on Wednesday 28 February, 2024.

Product Datasheet

AS08P-D for only $120.64 - Steambrite's price on the Sprayer - AS08P-D extractor, Equipmentcarpet cleaning equipment, Equipment flood restoration, Equipment carpet cleaning machine,