Lasco 2 Fip Pvc Cap for Truckmount Kunkle Vacuum Relief Air Valve - 448020

2 Fip PVC Cap for Truckmount Kunkle Vacuum Relief Air Valve 448020 [448020]

Click to enlarge

Your Price: $7.17
Part Number: 448020
Quantity:
Estimated shipping cost: $ 8.00

2" Fip PVC Cap for Truckmount Kunkle Vacuum Relief Air Valve

The Amazing Pentair Kunkle Vacuum Relief Air Valve can double the performance of your truckmount. Run longer lengths of hose, and dry carpets faster. Get your carpet cleaner (because the water you leave in the carpet is just as dirty as it is in the waste tank) the less water on the carpet is cleaner carpet.

The problem with spring loaded vacuum relief valves, is as you add more hose length the air restriction causes the industry standard valve to start to compress the spring and leak air into your waste tank. Once you place the wand on the carpet, even more air leaks into the waste tank.

Not with the Steambrite Truckmount Vacuum Relief Air valve. It keeps the valve completely closed until it reaches 14" HG of vacuum. Then the valve opens all the way. When the vacuum falls below 14" HG, the valve closes again. A #45 blower can operate up to 700 ft of hose and performs just like a #56 blower.

Dry times are cut in half.

Valve mounts to any 2" Mip thread. Usually installs on a "T" fitting right where the vacuum hose barbed fitting screws into the top or side of the waste tank. Once you mount our valve to your machine, just tighten up the spring on your old vacuum relief valve to prevent leakage.

carpet cleaners truckmount vacuum relief valve

Cap is drilled with four 11/32" holes plus one 7/16" hole in center when used with a 45 truckmount blower. Adjust hole sizes based on cfm rating of your blower.

This Kunkle valve comes standard on all MasterBlend El Diablo Truckmounts and can be added to any truckmount with a twin cylinder hp engine that has extra horse power left over in the design.

Example: 30 hp with a 47 blower is not OK, while a 34 Hp with a 47 blower is OK.
The 30 hp already bogs the engine when it is loaded with heavy vacuum work.

a 15 hp with a 36 bower is not OK
a 18 hp with a 36 blower is not OK, while a 20 hp with a 36 blower is OK
a 20 hp with a 45 blower is not OK while a 25 hp with a 45 blower is OK, but 27 would be better.
a 13 hp single cylinder with a 33 blower is not OK, while a 16 hp twin cylinder engine with a 33 blower is OK.

Air travel is inbound on male side and outbound on female side. Add 2" drilled pvc cap to adjust performance (important)

Steambrite processes shipments daily by Fedex, UPS, and USPS (for small packages), as well as a using a variety of freight carriers for oversized/palletized shipments. While the Steambrite website DOES reflect what is available for purchase, it does NOT reflect available inventory at our local warehouse (San Antonio, TX). Special order, or custom build items may take up to 30 days to arrive, but orders shipped from within Steambrite's warehouse inventory are generally processed and shipped in 2-5 business days. Equipment small enough to be sent by ground should typically arrive within 3-5 business days after shipment. Oversized shipments could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed.
2 Fip PVC Cap for Truckmount Kunkle Vacuum Relief Air Valve 448020 [448020]

Click here for our full shipping policy. Specifications are subject to change without notice.
Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. Display images are for reference only, note that all purchases are fulfilled by the part number ordered. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.

This product was added to our store on Monday 16 December, 2013.

Product Datasheet

Customers who bought this also bought:

Clean Storm 3266 Strain Relief System for Heavy Duty 1/2in Thick Power Power Cords NM5038 JE Adams 8549	HydraMaster 80372, 000-159-115 Pumptec Truck Mount, Fresh Water Storage Tank, Wheel Well Cut Out, 110Gal CS-FWT-110	Clean Storm TKFltr Truckmount Waste Tank Filter 2in FPT 100 Mesh PP14-806509 - FLW50S 20220627
WestPak 10-0587 Carpet Cleaning Wand Check Valve 1/8in B217 VeeJet Extension	Clean Storm AH48 Cuff 2in Thread Hose x 1.5in Slip Reducing Vacuum Hose Cuff H498A 87089000 J00627	Flojet 01740000S, 3/4in Barb X 3/4in Barb, 40 Mesh Strainer Pump Filter, 01740000 UPC 01740000
Hose Vacuum Hose 12ft x 2.0in - Double Lined with cuffs installed [AH30-12] 520433	Clean Storm AH44 Vacuum hose Cuff 2in Thread X 2.0in Slip - 2in Standard 8.708-904.0 B016 J11630 530009	Dirty Grout Demon Pro Brush with DuPont Tynex Fibers 20100726 AB112 GB200 ABC-TTGS-1
Clean Storm PX13, Vacuum Motor Gasket, fits 5.7in Vacuum Motors, 1/4in Thick PP43-807110 Mytee G004A Hydrotek HL031	Century 400 Windsor Ind Ninja 12in Wheel For Carpet cleaning Machine 5/8in and 1/2in axles 89252 98407770 Each	Mytee G004 Silicone 5.7in Vacuum Motor Gasket Heavy Duty Electro Motor 478-27 For Conical Vac Motors

448020 for only $7.17 - Steambrite's price on the Truck Mount Accessories - 448020 extractor, Equipmentcarpet cleaning equipment, Equipment flood restoration, Equipment carpet cleaning machine,