Pumptec 81275 Series 207V 085/M9253F 120v 4 - 3/8in PORTS 600Psi 8.620-105.0 250-74 80547 GTIN 10679065072436 [81275]

Click to enlarge

Your Price: $398.26
Part Number: 81275
Quantity:
Estimated shipping cost: $ 25.00

Pumptec 81275 Series 207V 085/M9253F 120v 4 - 3/8in PORTS 600Psi G13102 8.620-105.0 250-74 80547

Description

The legendary 207V plunger pump was originally developed to meet the performance needs of commercial carpet extractor manufacturers. The low flow rate and 500psi spray cleans soft carpet fibers without leaving the carpet too wet and is optimized for their inline heaters on heated extractors. Since there is no oil reservoir in the pump design, it can be tipped completely upside down without causing any issue.
Pump operation can take place in any position as this pump does not need or use any pump oil in a crankcase. Typically sold as a system with one of our panel mount pressure regulators. Capable of flow rates up to 1.5gpm and pressures up to 600psi. Designed to fit our 1/4hp permanent magnet DC motors and 1/2hp AC induction motors. Performance can be optimized to your application flow rates. This pump is proudly made in the USA from aircraft-grade aluminum and stainless steel.
Pump head can be removed from motor and flipped over 180 degrees and re-installed upside down to change the location of the water in and water out connections.

The 207V series is used to replace past 204V, 205V, 206V series, discontinued pumps and is also available with motors in different voltages and hose power. Pump can be suction feed or pressure feed but does require a pressure regulator and pulse hose.
Pump head can ship in Blue, Gold, or Black color, factory choice.

Pictures

Specification

Part Number	81275
Max Pressure (psi)	600
Open Flow (gpm)	1.00
Seals	NBR
Volts	120 VAC
Amps	3.2
Inlet Ports	(2) - 3/8" NPT (F)
Discharge Ports	(2) - 3/8" NPT (F)
Max Fluid Temp. (℉)	140
Body	Anodized Aluminum
Plunger	Stainless Steel
Valves	Stainless Steel
Weight	20.0

Downloads

Owners Manual for 205 and 207 series (2022)
Owners Manual for 205 and 207 series

Includes one each of the items below

	Factory Installed Bridge Rectifier for Edic, PumpTec, Burnishers, & More
	Factory Installed Pumptec: M9253F Motor Only Replaces the Old M53
	Factory Installed Pumptec: Repair Kit "C" Cam Bearing for 400-500 Psi Models 204V, 205V, 207V, 217V .085 Stroke Replaces 0100-6005-0095
	Factory Installed Pumptec: 207V Pump Head Only 60065
	Factor Included Pumptec Kit, Base Mounting Plate / Bracket For M20/M53/M54 Motors (Included but not installed)

Compare to and replaces Current or past OEM Associations:

Ninja 8.620-105.0
Windsor 250-74
86201050
4039784269613
Kleenrite SL-22.5
EDIC G13102
Replaces 204-pump-h2041
Powrflite PT400MS
207V-085/M9253F
222380221642
Replaces W1106-073
Replaces 80604 207v - 095 / M53
323938352227
PUMP81275
Pumptec 80685 207V - 125 / M53
Pumptec 80679 204V-125/M53
Pumptec 80678 204V-110/M53
Pumptec 80680 205V - 125/M53
Pumptec 80897 207V - 120/M53
7777687871263
17013512161
B4CPM-164
US Products, Hydramaster, Advance, Nilfisk 81595 **
PT-81275
80547
CE-25074-EA
81275-1
81275
80022
205V
B09WZ35RTR
133799
1679-3933
Tennet 9011734
375-1623
GTIN 653341065643

Optional

	Optional 3/8" Mip X 1/4" Fip Brass Bushing Adapter **Does your original pump have or use 1/4" hose connections? If so you might want to purchase some of these bushing to convert 3/8" holes to 1/4" pipe connections. On US Products, Hydramaster, Advance, and Nilfisk machines the answer might be "yes" or if your machine 204v series head installed originally.
	Optional Pumptec: Series 205V 204v, 207v 500 PSI Upgrade Kit You will need this kit to convert a lower pressure system 50 - 220 psi to a standard 500 psi carpet cleaning machine. Includes pulse hose and pressure regulator
	Video On Link Optional Pumptec: Repair Kit for 500-510 Models Brass Pressure Regulator C-500/510-KIT_RR
	Optional Pumptec 205V and 207V Triple Repair Pump Head Rebuild Kit Required change every 500 hours by factory.

	Pumptec 81009 Pump Motor Set 500Psi 1.06Gpm Series 207V Head 125 Cam M58 Motor 120/240 Dual Voltage Mytee C342 81371
	Pumptec 80684 Pump Motor Set 800Psi 0.9Gpm Series 207V Head 105 Cam M58 Motor 120/240v Dual Voltage

Steambrite processes shipments daily by Fedex, UPS, and USPS (for small packages), as well as a using a variety of freight carriers for oversized/palletized shipments. While the Steambrite website DOES reflect what is available for purchase, it does NOT reflect available inventory at our local warehouse (San Antonio, TX). Special order, or custom build items may take up to 30 days to arrive, but orders shipped from within Steambrite's warehouse inventory are generally processed and shipped in 2-5 business days. Equipment small enough to be sent by ground should typically arrive within 3-5 business days after shipment. Oversized shipments could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed.
Pumptec 81275 Series 207V 085/M9253F 120v 4 - 3/8in PORTS 600Psi 8.620-105.0 250-74 80547 GTIN 10679065072436 [81275]

Click here for our full shipping policy. Specifications are subject to change without notice.
Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. Display images are for reference only, note that all purchases are fulfilled by the part number ordered. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.

This product was added to our store on Monday 25 March, 2013.

Product Datasheet

Related Items:

Pumptec 60065, 207V Pump Head Only (replaces 204V 205V 60029 60031 60035 60062 60065 8.630-282.0 PT065 86318990) GTIN NA (60065)	Pumptec 81178 Pump Motor Set 350U-150/M50-8 12V Viton M-VALVE 4-3/8in Port GTIN 10679065072092 (81178)	PumpTec 10014, KIT-B Valve and Seals, 114T/114V For U Valves Buna PX10014, GTIN 10679065070340 (10014)
Pumptec Bracket-500, Regulator Panel Mount Bracket, for 300 to 500 psi Regulators, 70154 GTIN: N/A (BRACKET-500)	Pumptec 81200 Pump Motor Set 350U-090/M81 120V Viton M-Valve 4-3/8in PORTS GTIN 10679065070746 (81200)	Pumptec 10017, KIT-A Plunger and Seals, 212T Buna, GtIN 10679065074041 (10017)
Pumptec C-REC-SM Bridge Rectifier for Water Pumps Burnishers and More 31210 GTIN 10679065070166 (C-REC-SM)	Pumptec 10003, 10055 Kit A 500 psi Plunger and Seals Kit, Repairs 204V, 205V, 207V, 217V Pump, 512-555 10679065072009 (10003)	Pumptec 70002, Repair Kit MV500-510 Regulator, C-500/510-KIT_RR Rebuild, BPR 8.619-924.0, Kaivac 250-33A GTIN: N/A (70002)
Pumptec 81247 Pump Motor Set 116C-075/M70 120V BUNA M-VALVE 6 - 1/4 inch PORTS SS PUMP GTIN: N/A (81247)	Pumptec 40242, Base Kit, Mounting Plate feet / Bracket, For M20/M53/M54 / M9253F Motors GTIN: N/A (40242)	Pumptec 81227 Corrosive Resistant Beach Pump 200psi 120 Volts 1.53 gpm White Polypropylene Construction GTIN: N/A (81227)

Customers who bought this also bought:

Clean Storm PX13, Vacuum Motor Gasket, fits 5.7in Vacuum Motors, 1/4in Thick PP43-807110 Mytee G004A Hydrotek HL031	Ametek Lamb 131410, Three Stage Vacuum Motor, 5.7in Value Line, 120 Volts, 090-131410-13 56113144	3/8 Mip Countersunk Hex Plug Brass 28095 Socket Cap
Brass Fitting BR014 3/8in Mip X 1/4in Hose Barbed 32006 ACR	Pumptec 0100-6005-0085, KIT-C 204/205/207 .085 CAM Bearing, 3/8 THREAD .465 THICK 123062, GTIN 10679065072078	Pumptec 70051, Pressure Regulator, 0-500 PSI - 1/4 F 3 Inlet Bypass Ports, MV500, Mytee C313C, Tennet 9011740 GTIN: N/A
Water and Air 1000Psi Pressure Gauge Stainless Steel Back Connection, 8.914-830.0 70066A G13051, 89148300 GTIN 783583824576	32-900195 Rocker Switch 2 Position On/Off, 4 pinned Mytee E515, Sandia Plastic 10-0803, (usually RED) Kaivac 86162010	AH74 Plastic Vacuum Hose Connector Joiner 1.5in BarbedX1.5in Barbed 1-1/2inID Union 579-015 J00630 Mytee H655
Clean Storm AC45 Premium Styrofoam Furniture Blocks WHITE 2in x 2in x 1in CASE of 1,000 - 55371 - 8.697-001.0 AC44	Kingston 251-30 Carpet Cleaning Replacement 1200 psi brass valve G00526-1 Kaivac CP09	Waste Tank Filter And Ball Float Assembly for Carpet Cleaning Machines Cage 1-1/2in 12505.1