Shertech Gcbn22v Gear Grease Oil Pump - Gcbn22v - Shertech Pumps - Pumps Water Pumps

Shertech GCBN22V, Gear Grease Oil Pump, (Limited Stock) [GCBN22V]

Click to enlarge

Your Price: $986.23
Part Number: GCBN22V
Quantity:
Estimated shipping cost: $ 32.00

High Performance Gear, Oil, and Grease Pumps

Shertech® gear pumps have various capabilities including flow rates up to 24 gpm, pressures up to 200 psi, fluid temperatures up to 400º F and viscosities up to 100,000 SSU.

Both close-coupled and pedestal-mounted pumps are offered in three materials of construction.

316 Stainless Steel can be specified for pumping clean, hard-to-transfer, high-temperature and/or highly-corrosive liquids. Cast iron and bronze meet the requirements of transferring a broad range of non-abrasive fluids, including oil and water-based fluids, respectively. Two gear types are available, spur (or straight) and helical. Spur gears provide excellent suction lift and are great for water or light oils. Helical gears have a non-clogging design and are capable of handling higher viscosity fluids.

Shertech pumps are simple in construction, with a minimum number of moving parts for less maintenance and longer life. Design features include mechanical seals, seal chambers with flush ports, oversized carbon graphite bushings, integral ball bearings and piston relief valves.
Used as Hewlett Packard External Gear Pump too.

Manufacturer Part No.

GCBN22V Owners Manual

UNSPSC

Manufacturer

HYPRO LLC

Notes

Shertech self-priming, positive displacement, external rotary gear pumps are ideal for a wide range of intermittent and light-duty industrial, marine, agricultural, and commercial applications, providing a nearly pulseless flow. Close-coupled models are directly mounted to NEMA framed, AC ODP single-phase, thermally overload-protected motors. All models include a pressure relief valve. Motor-driven models are HP configured to handle up to 500 SSU at 100 psi (specific gravity of 1.0). Uses: For use with non-particulate and non-abrasive fluids compatible with pump wet-end construction component materials.

Flows to 4.4 gpm.
Max. RPM: 1725.
Max. PSI: 100.
Maximum viscosity of 500 SSU at 1725 RPM (max. input torque of 45 in/lb).
Pumps can operate bi-directionally (reversible). In reverse operation, the pressure relief valve will not function.
Temperature ranges from -20° to 210°F.
Maximum working pressure: 150 psi.

Maximum Flow		2.2 gallons/min
TDH (Head) Maximum @ 0GPM		100 PSI
Head (TDH) Maximum @ 0GPM		231 FT
HP Standard		0.33 HP
Inlet Connection Type		FNPT
Inlet		0.25 "
Outlet Connection Type		FNPT
Outlet		0.25 "
Wetted Materials		CI
		Steel
Elastomers		Viton
Voltage		115 V
Phase		1
Frequency		60 Hz
Motor		ODP
Motor Amps		6 A
Speed		1725 RPM
MTR Cord Length		0 FT
Self Priming		Yes
Suction Lift		3 FT
Max Operating Temp		280 °F
Viscosity		SAE 10 oil 88.00 cp 500.00 ssu
Max. Particle Size		0.03 "
Max. Particle Hardness		2 MOH
Max. Volume of Suspended Solids		0 %
Shaft		Steel
Mechanical Seal Face		Carbon-ceramic
Mechanical Seal Type		Single
Warranty		1 Year/s
Applications		Flooded Suction
		Fuel Oil
PH High		7 pH
Country of Origin		USA
Weight		19 lbs

5-5/8" H X 13-11/16" L

Applications

CARBONATOR-MOUNT CAST IRON PUMPS (INTERMITTENT DUTY) - Specifically designed for use with oil-based fluids. Not to be used with water-based fluids. Pumps include steel spur gears with steel shafts and cast iron shaft support; standard pressure relief valves that can be ported internally or externally and a Viton® mechanical carbon/ceramic-faced seal with temperature range of 32° to 280°F. Wet-end parts are constructed from cast iron, steel, stainless steel (302, 303 and/or 18-8), carbon, ceramic, and Viton®.CARBONATOR-MOUNT BRONZE PUMPS (INTERMITTENT DUTY) - Excellent for water-based fluids. Feature 303 stainless steel shafts, carbon graphite bushings, and Buna-N mechanical carbon/ceramic faced seal with a temperature range of -20° to 210°F. Standard pressure relief valves can be ported internally or externally. Wet-end parts are constructed from bronze, brass, stainless steel (302, 303 and/or 18-8), graphite, carbon, and Buna-N.

Cast Iron Gear pump close coupled to a 1/2 hp Carbonator type motor. Steel spur gears with steel shaft and CI shaft supports. Standard pressure relief valves that can be ported internally or externally and adjusted.

Specifically designed for use with oil-based fluids. Not to be used with water-based fluids. Pumps can operate bi-directionally (reversible). Equal in performance to 4khr1.

also marketed under part number(s)
gear pump cooking oil pump grease trap pump

Maximum Flow 2.2 gallons/min

TDH (Head) Maximum @ 0GPM 100 PSI

Head (TDH) Maximum @ 0GPM 231 FT

HP Standard 0.33 HP

Inlet Connection Type FNPT

Inlet 0.25 "

Outlet Connection Type FNPT

Outlet 0.25 "

Wetted Materials CI

Steel

Elastomers Viton

Voltage 115 V

Phase 1

Frequency 60 Hz

Motor ODP

Motor Amps 6 A

Speed 1725 RPM

MTR Cord Length 0 FT

Self Priming Yes

Suction Lift 3 FT

Max Operating Temp 280 °F

Viscosity SAE 10 oil 88.00 cp 500.00 ssu

Max. Particle Size 0.03 "

Max. Particle Hardness 2 MOH

Max. Volume of Suspended Solids 0 %

Shaft Steel

Mechanical Seal Face Carbon-ceramic

Mechanical Seal Type Single

Warranty 1 Year/s

Applications Flooded Suction

Fuel Oil

PH High 7 pH

Country of Origin USA

Weight 19 lbs

Maximum Flow		2.2 gallons/min
TDH (Head) Maximum @ 0GPM		100 PSI
Head (TDH) Maximum @ 0GPM		231 FT
HP Standard		0.33 HP
Inlet Connection Type		FNPT
Inlet		0.25 "
Outlet Connection Type		FNPT
Outlet		0.25 "
Wetted Materials		CI
		Steel
Elastomers		Viton
Voltage		115 V
Phase		1
Frequency		60 Hz
Motor		ODP
Motor Amps		6 A
Speed		1725 RPM
MTR Cord Length		0 FT
Self Priming		Yes
Suction Lift		3 FT
Max Operating Temp		280 °F
Viscosity		SAE 10 oil 88.00 cp 500.00 ssu
Max. Particle Size		0.03 "
Max. Particle Hardness		2 MOH
Max. Volume of Suspended Solids		0 %
Shaft		Steel
Mechanical Seal Face		Carbon-ceramic
Mechanical Seal Type		Single
Pump Bearing		Carbon/graphite
Motor Bearings		Ball
Impeller Mat'l / Type		Bronze gears
Warranty		1 Year/s
Applications		Flooded Suction
		Fuel Oil
		Cooling Oil
		Constant Pressure

		Fuel Oil
		High Pressure
PH High		7 pH
Other		Self priming with wetted gears
Country of Origin		USA
Duty		Inter.
Weight		18 lbs

20101119 dc

Steambrite processes shipments daily by Fedex, UPS, and USPS (for small packages), as well as a using a variety of freight carriers for oversized/palletized shipments. While the Steambrite website DOES reflect what is available for purchase, it does NOT reflect available inventory at our local warehouse (San Antonio, TX). Special order, or custom build items may take up to 30 days to arrive, but orders shipped from within Steambrite's warehouse inventory are generally processed and shipped in 2-5 business days. Equipment small enough to be sent by ground should typically arrive within 3-5 business days after shipment. Oversized shipments could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed.
Shertech GCBN22V, Gear Grease Oil Pump, (Limited Stock) [GCBN22V]

Click here for our full shipping policy. Specifications are subject to change without notice.
Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. Display images are for reference only, note that all purchases are fulfilled by the part number ordered. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.

This product was added to our store on Saturday 21 August, 2010.

Product Datasheet

GCBN22V for only $986.23 - Steambrite's price on the Shertech Pumps - GCBN22V extractor, Equipmentcarpet cleaning equipment, Equipment flood restoration, Equipment carpet cleaning machine,

High Performance Gear, Oil, and Grease Pumps