Tuthill 4007-21T2 Competitor Blower Top Shaft - 4007-21T2 - Blowers and Vacuum Pumps

Tuthill 4007-21T2 Competitor Blower Top Shaft [4007-21T2]

Click to enlarge

Your Price: $3,455.64
Part Number: 4007-21T2
Quantity:
Estimated shipping cost: $ 259.00

Product Options
Shipping Surcharges:

COMPETITOR PLUS™ blowers are designed to be interchangeable with equivalent sizes of Roots Universal RAI®, and many Sutorbilt® California Series B and F, and Legend™ Series L and P blowers. COMPETITOR PLUS models are rated up to 15 PSIG discharge pressure or 16" Hg dry vacuum. In addition to interchangeability, Competitor Blowers have superior features ordinarily found only on premium blowers - see table below.

Performance Specifications:

Pressure range: up to 15 PSIG (1.03 bar g)
Vacuum range: up to 16" Hg (540 mbar g)
530 CFM @ 3600 RPM

Material Specifications:

Housing: Cast iron
End Plates: Cast iron
End Cover: Cast iron
Rotors: Ductile iron
Shafts: Ductile iron, cast integrally with rotors
Drive Shaft: Ductile iron, cast integrally with drive rotor
Gears: Heat treated alloy steel, helical cut
Seals: Lip seals on rotor shafts and drive shaft
Lubrication: Oil splash on gear end, grease on drive end

Bearings:

Gear end: Double row ball, both rotors
Drive End: Cylindrical roller on drive rotor, Single row ball on driven rotor

Helical Gearing		Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise.

Double Row Ball Bearings		For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands.

Rotors with Integral Shafts		COMPETITOR PLUS™ blowers are available in two-lobe or tri-lobe variations. The tri-lobe variation offers reduced pulsation and lower noise levels. The two-lobe variation is ideal for processes with heavy contamination. For vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time.

Positive End Clearances		Eliminates the risk of shifting end clearances when installing or removing drive components.

Polished Sealing Surfaces		All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage.

Individually Tested		Every COMPETITOR PLUS™ blower is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards.

This can be used an exact drop in replacement for Dresser Roots URAI #47 vacuum blower (same footprint, same dimensions, same port openings). Shaft diameter is 7/8".
Shipping weight: 140#
Shipping Dimensions:
25x21x26H

Applications:

Carpet Cleaning
Dairy Milking
Mosquito Fogging
Wastewater Aeration
Trenchless Drilling
Air Sparging
Compost Aeration
Vacuum Cleaning
Dust Collection

Features:

Gears: Helical gearing for quiet operation
Bearings:
- Gear End: Double row ball
- Drive Shaft: Cylindrical roller
Rotors: Ductile iron, integrally cast with shafts
Lubrication:
- Gear End: Oil splash
- Drive End: Grease
Seals: Lip
Low noise option available on most models
Flow range: 6 - 2300 CFM (10 - 3900 m³/h)
Pressure range: up to 15 PSIG (1.03 bar g)
Vacuum range: up to 16" Hg (540 mbar g)
Every unit tested before shipment
Model 4007 Performance Curves

Rotary Positive Gas Blowers

Designed with features found ordinarily on high-end
blowers, COMPETITOR GT blowers are still designed to be
interchangeable, with respect to foot print, shaft height and
diameter, with equivalent sizes of Roots Universal RAI-G®, and
many Sutorbilt® California Series Legend™ Series L and P, as
well as M-D Pneumatics COMPETITOR PLUS™ blowers.

Splash Oil Lubrication at One End

COMPETITOR GT blowers include splash oil lubrication at gear side and grease on shaft side.

Helical Gearing

COMPETITOR GT blowers are timed with hardened, precision
helical gears, keyed to the rotor shafts, not taper fit spur gears
offered by other manufacturers which have greater backlash,
and can slip and lose timing. Helical gears are also quieter,
further reducing mechanical noise.

Stronger Bearings

All COMPETITOR GT blowers include double row ball bearings
at the gear end, stronger than single row ball bearings offered by
other manufacturers. Drive shaft bearing is cylindrical roller type
for additional strength against side loading from V-belt drives.
As a result of this superior design, COMPETITOR GT blowers
offer significantly longer bearing life than models offered by
other manufacturers.

Rotors with Integral Shafts

COMPETITOR GT blowers include precision machined ductile
iron rotors with large, integrally cast shafts, not press fit and/or
pinned shafts offered by other manufacturers, which can loosen
over time and cause rotor clash. All rotors are dynamically
balanced for vibration-free rotation.

Positive End Clearances

End clearances are positively established at the blower gear end,
eliminating the risk of shifting end clearances when installing or
removing drive components. This also eliminates the need for
those special fork and saddle tools required by other brands to
reset end clearances.

Polished Drive Shaft Sealing Surfaces

Driveshaft is polished to reduce seal wear and risk of leakage.

Every Tuthill blower is backed by the Tuthill Vacuum & Blower Systems limited warranty:

Type of Application
Atmospheric Air or Process Air without Liquids Present:	Process Gases Other than Air, or Any Liquid Injected Application:
24 months from date of shipment, or 18 months after initial startup date, whichever occurs first.	12 months after sale

The COMPETITOR PLUS™ has been engineered and designed to fit right into your existing process without any modification, and at a lower cost than Roots, Sutorbilt, or Gardner Denver.

2002	22 URAI	2M	1" NPT	41 lbs
Competitor Plus	Roots Model	Sutorbilt Model	Port Connection	Blower Weight
2004	24 URAI	2L	2" NPT	53 lbs
3002	32 URAI	3H	1.25" NPT	78 lbs
3003	33 URAI	3M	2" NPT	83 lbs
3006	36 URAI	3L	2.5" NPT	113 lbs
4002	42 URAI	4H	1.5" NPT

Drop in replacement for: Roots URI 47 and Sutorbilt 4L

Tuthill Blower Brochure

Owners Manual

Outline Sheet

Spec Sheet
The factory does not paint the blower.

They only apply a light primer spray to slow down rusting.

When you open the box all new blowers are rusted.
If you want us to take the blower out of the box and paint it, please let us know and we can do this for an extra fee.

.
Important Option

Oil level must be topped off on new blowers
Oil level must be changed after 50 hour break in period.
Oil level must be changed every 200 hours after break in period.
Gardner Denver 28G46 Brand Blower Oil Aeon PD-XD Full Synthetic Formula Extra Heavy Duty for High Heat Applications 28G47-QT
Add to your shopping cart now!

Steambrite processes shipments daily by Fedex, UPS, and USPS (for small packages), as well as a using a variety of freight carriers for oversized/palletized shipments. While the Steambrite website DOES reflect what is available for purchase, it does NOT reflect available inventory at our local warehouse (San Antonio, TX). Special order, or custom build items may take up to 30 days to arrive, but orders shipped from within Steambrite's warehouse inventory are generally processed and shipped in 2-5 business days. Equipment small enough to be sent by ground should typically arrive within 3-5 business days after shipment. Oversized shipments could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed.
Tuthill 4007-21T2 Competitor Blower Top Shaft [4007-21T2]

Click here for our full shipping policy. Specifications are subject to change without notice.
Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. Display images are for reference only, note that all purchases are fulfilled by the part number ordered. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.

This product was added to our store on Friday 02 August, 2019.